Razi Metallurgical Research Center
in Metafo International Exhibition at Tehran International Permanent Fairground 24-27 November 2016, Hall 8 and 9, No.B1
Fire Test of Construction Materials
Pouring the piece of the cement factory headwall weighing 51 ton was successfully completed on 4 October 2016 in Saya steel
industries located in Isfahan. View of the piece releasing from the mold is shown in the figure below. Razi Metallurgical Research
Center casting research team as an adviser and observer in the process of making this piece has collaborated with performers.
Fire Test of Construction Materials
Implementation the latest fire test of construction materials according to the ASTM E84 standard to determine the surface burning characteristics
is provided. Fire testing of construction materials, includes the burning behavior of materials used for example in walls and ceilings. This test
is by positioning the sample at furnace roof so that the assessing surface is downwards and in direct contact with flame source. The purpose of this test is to determine the relative burning behavior of the material by observing the fire spread throughout the sample. Flame spread and smoke density (concentration), are two important parameters that are evaluated in this test. Checking the flame spread and smoke density of test sample is by comparing the results of two similar parameters derived from burning Oak wood and cement board. In order to respond to the needs of industries such as oil, gas, petrochemical and construction industries, the ability to perform this test on a sample of one meter length, five hundred
and eight mm width and a thickness up to ten centimeters is provided at Razi Metallurgical Research Center’s performance laboratory.
Copper Blade Corrosion Detection in Oil Products
Razi metallurgical research center corrosion laboratory has the facilities to detect copper blade corrosion in oil products in accordance
with ASTM D 130 and ISIRI 336. This test is to determine the amount of copper corrosion in liquid petroleum
products and solvents such as aviation fuel, gasoline, cleaners and industrial solvent,
lubricants and other petroleum products and hydrocarbon products with a vapor pressure of 124 kPa, at the maximum 37.7 ° C.
corrosive mineral-fiber insulation materials
Razi Metallurgical Research Center corrosion laboratory has the testing facilities of "corrosive mineral-fiber insulation
materials (rock wool)," according to ASTM C665.
This test is a qualitative evaluation of the mineral fiber insulation corrosivity test by comparison with the control samples.
Engine Coolant Corrosion Testing (antifreeze)
Razi Metallurgical Research Center has the facilities to perform engine coolant corrosion testing according to ASTM D 1384 standard. This test is in order to
evaluate the effect of chemical coolants on metallic parts of the engine and the corrosion of metals is studied based on weight loss.
Determining the Feasibility of Hydrogen Embrittlement in Hot Galvanized Steels
Razi Metallurgical Research Center corrosion testing laboratory has the equipments to determine the
feasibility of hydrogen embrittlement in hot galvanized
steel plates in accordance with ASTM standard. This test is for assessing the quality of
hot dip galvanizing coatings that the study of which on profiles, building structures, fittings and bolts steel is of great importance.
Determination of Corrosion Inhibition Test to Assess the Vapor Phase Corrosion Inhibitor Materials on the Surface of Ferrous Metals
Razi metallurgical researching center's Corrosion laboratory has facilities to operate inhibition test of anti-corrosion materials in
accordance with American Standard NACE TM0208. The test is to evaluate the quality and ability of anti-corrosion
materials and corrosion inhibitors of vapor phase and the status of protection against corrosion of ferrous metals is studied.
Installation of Thermal Humidity Chamber in RMRC' Performance laboratory
Thermal humidity chamber - type GT-7005-AT2, in order to simulate a wide range of environmental conditions at
temperatures from -20 to 100 ° C and humidity range of 30 to 95% and on a diverse range of samples
and products is being used. The capability to test samples with different temperature - humidity conditions
such as constant temperature and humidity and also humidity and thermal cycles is provided. Another feature
of these test devices are refrigeration to a temperature of - 20 ° C and embedded double valve in the wall.
Therefore the functional efficiency of electrical equipment and components, such as parts used in automotive
or other industries by applying current / voltage in different conditions of temperature and humidity, is possible.
This research is based on various standards such as national test standards, ASTM, KES, EN, ISO and JIS and in the
absence of standard, simulation based on real conditions of operation, can be performed.
Razi Metallurgical Research Center's Autumn Conference
On Monday 3rd October RMRC's autumn conference was held in the presence of managers, directors and experts from partner companies at Razi Metallurgical Research Center.
As part of the conference, participants visited the facilities of the RMRC and the development of bilateral cooperation between both parties was investigated.
In other parts of the conference, RMRC's services and management issues were presented to the audience.
Razi Metallurgical Research Center in 9th Nanotechnology Festival at Tehran International Permanent FairGround October 5-8, Khalij Fars Hall, Second Floor, No.39
Electron Microscopy Working Group Meeting in Razi Metallurgical Research Center
On Wednesday 7th September, electron microscopy committee meeting was held in Razi Metallurgical Research Center.
The meeting was held with the participation of experts from different companies. Razi
Metallurgical Research Center was introduced in this meeting and different parts of the RMRC and its laboratories were visited after lunch.
"Razi Metallurgical Research Center" has no liability for the reports and activities from other laboratories under the name
of "Razi Metallurgical Research Center ".
Please inform Razi Metallurgical Research Center' management if there is any misuse to take legal proceedings
Nondestructive Testing Laboratory
Radiographic interpretation of castings
Radiographic interpretation of gray cast iron up to 51mm thickness, steels up to 51mm thickness in accordance with (ASTM E802, ASTM E446, and ASTM E155), aluminum, and magnesium in accordance with reference standards.
Top Ranked Laboratory at the 2d Performance Evaluation of Members of Iran High-Tech Laboratory Network
2d Performance Evaluation of members of Iran High-Tech Laboratory Network based on performance in 1394 was performed
and each center was ranked according to achieved scores on the assessment. In this ranking, (Razi Metallurgical
Research Center) was top-ranked among laboratory network member centers. Laboratory network member centers performance
evaluation is according to three main indicators such as customer’s satisfaction, cooperative networks, functionality.
the Role of Emotional Intelligence in Successful Business
Top Ranked Laboratory in Country at 14th Nanotechnology Laboratory Network Member Centers Performance Evaluation
14th nanotechnology laboratory network member centers performance evaluation based o
performance in 1394 was performed and each center was ranked according to achieved scores on the assessment.
In this ranking, (Razi Metallurgical Research Center) was top-ranked among 54 laboratory network member centers.
Laboratory network member centers performance evaluation is according to three main indicators such as customer’s satisfaction,
cooperative networks, functionality. It should be mentioned that Razi Metallurgical Research Center achieved scores on customer’s
satisfaction and functionality was respectively 96.20 and 98.24 which is the best performance.
In Celebration of Workers, Group Work and Sample Units of Tehran Province
On 28 May 2016, "Razi Metallurgical Research Center among thousands of production units, industry and research centers in Tehran province was chosen as a top unit and received a memorial plaque on this occasion.
In this event the CEO of Razi Metallurgical Research Center as a guest lecturer talked about “the role of labor in creating a balanced values".
Razi Metallurgical Research Center in 21 st International Oil, Gas, Refining & Petrochemical Exhibition at Tehran International permanent Fairground May 5-8, 2016 Hall 6, No.906
RMRC has been Listed in Knowledge-Based Companies
To inform all beneficiaries that "Razi Metallurgical Research Center" has been listed in knowledge-based companies from 12-3-2016.
Congratulations to all beneficiaries for this great success which are RMRC’s reputation and we hope to achieve our organization's visions and goals by taking perfect steps with your help and collaboration.
Top Ranked Laboratory in Country at 10th International Conference on Nano Structures (ICNS10)
Razi Metallurgical Research Centre on March 17-10 2016, simultaneously with the 10th International Conference
on Nano Structures (ICNS10) that was held in Kish Island, won the first place award laboratory of Iran Nano
Technology Laboratory Network (INLN). Congratulations on this success to all beneficiaries of the RMRC.
Setting up Facilities of Immersion Test of Seal Polymer Materials
To inform customers producing seal polymer materials and companies associated with oil, gas and petrochemical industry that for the first time in Iran the ability to perform fluid immersion testing of elastomeric materials according to API 6A is available at RMRC's corrosion testing laboratory. Fluid immersion testing is in order to determine the resistance of polymeric materials used in oil, gas and petrochemical industry against hydrocarbon fluids containing H2S at high temperature and pressure conditions.
For more information contact us at (+98-021-6307)
To contact the management research group of corrosion and coating department please call at 160 (internal)
Mr Hamid Ghorbani Kalkhajeh As the Supervisor of Technical Protection and Inspection Department of Petroleum Engineering and Development Company (PEDEC) Visited the RMRC
Sunday 31st January, Mr Hamid Ghorbani Kalkhajeh as the supervisor of technical protection and inspection department of Petroleum Engineering and Development Company (PEDEC) accompanied by respected experts in this field visited the RMRC and surveyed the Development of mutual cooperation with the management and experts.
Visiting The President of Qods City Council and Members of the city council from RMRC
Saturday 6th February Mrs. Ajorloo, the president of Qods city council and members of the city council accompanied by a group of authorities and teachers visited the RMRC. During the visit which lasted for 6 hours, the visitors became familiar with the areas of activities of RMRC and offered valuable guidelines for growth and development in a warm and intimate environment.
Visiting the Director General Pakistan Standards and Quality Control Authority (PSQCA) and Accompanying Delegation from Razi Metallurgical Research Center
Monday 11th January, Mr. Barkat saeed memon the Director General Pakistan Standards and Quality Control Authority (PSQCA) and Mr. Mohammad Khaled Sedigh, assistant secretary of Pakistan minister of science accompanied by some management of Institute of Standards and Industrial Research of Iran (ISIRI) visited the Razi metallurgical research center (RMRC) and become familiar with the abilities of the Razi metallurgical research center. Also the Pakistani delegation expressed their interest to use the knowledge and experiences of Razi metallurgical research center.
Razi Metallurgical Research Center in Metafo International Exhibition
at Tehran International Permanent Fairground 16-19 October 2015, Hall 8 and 9,
Razi Metallurgical Research Center in 8th Nanotechnology
Festival at Tehran International Permanent FairGround October 5-8, Khalij Fars
Second Floor, No.45
Casting Design & Simulation of Pump Casing & Impeller for Pumpiran Co
The gating and risering system design with the simulation of casting process for 3 pieces of pump collection including Up & Down casing
with Impeller was
performed in the Engineering and Design Dept. of Razi Metallurgical Research Center in order of Pumpiran Co.
Razi Metallurgical Research Center
in 20th International
Oil, Gas, Refining & Petrochemical
Exhibition at Tehran International permanent Fairground
May 6-9, 2015
Hall 18, No.24
Accreditation Certificate of RMRC Laboratories
Accreditation Certificate of razi metallurgical research center laboratories:
To notify our customers, Certificate of Accreditation of Tehran and Bandar Abbas laboratories, No. NACI/ lab/ 145, extended on 7 February 2015 and is valid until 7 February 2018.
The certificate and the related pages can be observed on the link below: